TILE ADHESIVE 300
Product Description
KONCRETE Tile Adhesive – 300 is a cement based, polymer modified, high quality tile adhesive developed for fixing ceramic tiles on internal floor and wall areas.
- KONCRETE Tile Adhesive - 300 is free from impurities and organic content. KONCRETE Tile Adhesive - 300 is manufactured in a very stringent quality control environment and provides consistent quality with hassle free service.
- This product has replaced the conventional method as it is ready to use by simple mixing with water at site and easily applying on the tiles surface. It not only gives better adhesion but also ensures void less tiles fixing. Application of tile adhesive also ensures saving of both time and money and also guarantees better quality tile work as compared to the conventional method.
Product Features & Benefits
Excellent adhesion with the substrat
PRODUCT SPECIFICATION
| Properties | Value |
|---|---|
| Guiding Standards | IS 15477 – 2019; IS 2386; ASTM C 109; EN 1015 |
| Colour | Grey |
| Water powder ratio | 25% by weight |
| Pot Life | 90 min @ 28° |
| Open Time | 15 minutes |
| Adjustable time | 30 minutes |
| Usage time post application | 24 hours |
| Bulk Density | 1300 – 1400 Kg/m3 |
| Compressive Strength @28 days | >10 N/mm2 |
| Tensile Adhesion Strength (Dry Condition | ≥1.5 N/mm2 (@ 28 days) |
| Shear Adhesion Strength (Dry Condition | ≥1.5 N/mm2 (@ 28 days) |
Note: Allow a minimum of 24 hours for the subsequent usage of the areas where tilling has been done. Tiling work not suggested if ambient temperature is likely to drop below 5°C or exceed 50°C. For ambient temperature below 20°C allow the adhesive to cure for an extended period of time. Pot life, open time and adjusting time depends on the surface absorption, wind factor, temperature and humidity conditions at site.